Mon–Sun: 12 AM–11:30 PM Serving Columbus since 1994

Outdoor Lighting Installation in Columbus

From pathway lights to permanent security fixtures, installed to Ohio electrical code by licensed professionals.

Outdoor Lighting Installation in Columbus

Get in touch

Call, text, or schedule online

★★★★★
“Quay came back today to work with the city on replacing our shut off valve. …”
Jackie R. · Google review

Columbus Outdoor Lighting Installation, Done Right

Safe Electric & Plumbing handles outdoor lighting installation in Columbus for homeowners across Central Ohio, from Clintonville bungalows to New Albany new builds. If you're wondering whether you need a licensed electrician for outdoor lighting, the honest answer is: it depends on the system, but anything connecting to your home's 120V line-voltage circuits requires one. Our electrical services team has been doing this since 1994, and we've seen what happens when landscape lighting gets wired by someone who isn't licensed. Call (614) 267-4111 to get it installed correctly the first time.

Outdoor lighting breaks into two categories, and the distinction matters for your budget and your permit requirements. Low-voltage systems (typically 12V) power most pathway and accent lighting through a transformer plugged into an outdoor outlet. They're lower stakes electrically, but they still need proper transformer sizing, correct wire burial depth, and waterproof connections to survive a Central Ohio winter. Line-voltage systems (120V) power floodlights, security cameras, overhead fixtures, and permanent architectural lighting. Those require a permit in Columbus, trenched conduit to code depth, GFCI protection at every outdoor outlet, and a licensed electrician to sign off. We handle both. Every job is different, so contact Safe Electric & Plumbing for an accurate estimate.

Outdoor Lighting Types We Cover

One call, every fixture type, every application.

Pathway & Landscape Lighting

Low-voltage systems for walkways, garden beds, and tree uplighting. We size the transformer, bury the wire to the correct depth, and use connectors rated for outdoor use so the system lasts through Ohio's freeze-thaw cycles.

Security & Floodlights

Line-voltage floodlights and motion-activated security lighting mounted to soffits, garages, and fence posts. Properly GFCI-protected and positioned to eliminate blind spots without spilling light onto neighboring properties.

Architectural & Soffit Lighting

Permanent fixtures that highlight your home's roofline, columns, or entryway. These tie directly into your panel and need conduit, correct gauge wire, and a permit from the Columbus Building & Zoning division.

Permanent Holiday Lighting

Dedicated outdoor circuits for permanent LED holiday or accent lighting strips. No more extension cords run through a cracked window every December. We install a weatherproof circuit built for continuous outdoor load.

Outdoor LED Upgrades

Swapping older halogen or incandescent fixtures for LED reduces energy draw significantly and cuts bulb-replacement calls. We match color temperature and lumens to what you already have so the upgrade looks intentional.

Post & Driveway Lighting

Lamp posts and driveway markers connected to a timer or photocell. We trench, install conduit, and tie into your panel so the fixture is on a dedicated circuit, not sharing load with your garage outlets.

Columbus Permit Requirements for Outdoor Lighting

Columbus requires an electrical permit for any new line-voltage outdoor circuit. That covers new floodlights, post lamps, architectural lighting, and any fixture that isn't simply plugging into an existing GFCI outlet. The permit process requires a licensed electrical contractor to submit the work scope, and a city inspector signs off after rough-in and again at completion. We pull the permit, schedule the inspections, and handle the paperwork. You don't have to call the building department yourself. Central Ohio's climate adds a layer most out-of-state guides ignore. Conduit buried less than 12 inches in Columbus can heave during a hard freeze. Connections that aren't rated for wet locations fail within two winters. We spec every job for Ohio weather, not a national average, because we've been working in Columbus, OH since 1994 and we know what the ground does in February. For questions about home electrical safety or what a full electrical service upgrade looks like before adding outdoor circuits, those pages have real answers.

How an Outdoor Lighting Installation Works

  1. Site Walkthrough & Design

    We walk the property with you, identify where fixtures need to go, determine whether you need low-voltage or line-voltage, and confirm whether your panel has capacity for new circuits. No design fees, no surprises at invoice time.

  2. Permit, Trench & Install

    We pull any required Columbus permits, trench to proper depth, install weatherproof conduit or direct-burial cable per NEC specifications, mount fixtures, and make every connection in a rated outdoor enclosure.

  3. Inspection & Walkthrough

    City inspection if required. Then we walk you through every fixture, timer, photocell, and GFCI so you know exactly how the system works before we leave. You get the permit card and inspection record for your files.

Why a Licensed Electrician, Not a General Contractor

General contractors can hang a fixture. They cannot legally pull an electrical permit in Ohio, and they cannot make the code-required connections to your panel. If something goes wrong with an unpermitted outdoor circuit, your homeowner's insurance can deny the claim. That's not a scare tactic; it's standard policy language. Ohio's electrical licensing requirements exist because outdoor wiring carries real risk. Water ingress into an improperly sealed junction box, a wire nicked during landscaping, a ground fault with no GFCI protection. We've responded to enough emergency electrician calls from homeowners cleaning up after a low-bid installation to say plainly: the savings on the front end rarely hold. 4.9 stars across 2,962 Google reviews. Matt Wehrle has been running this team since 1994. We're not the cheapest option in Columbus, and we don't try to be. We're the option where the work passes inspection, the warranty is real, and there's a direct owner number to call if anything isn't right: (614) 267-4111.
pathway landscape lighting work, professional service in Columbus, OH

The Safe Electric & Plumbing Commitment on Every Outdoor Job

32 years in Central Ohio. Every technician background-checked, drug-tested, and licensed.

  1. 100% Satisfaction Guarantee

    If the installation or our professionalism doesn't meet your expectations, we make it right. That's in writing.

  2. Upfront Pricing Before Any Work Starts

    You see the number before we pick up a tool. No invoice surprises.

  3. Permit Pulled & Inspection Scheduled

    We handle Columbus permitting from start to close. You get the inspection record.

  4. BBB Accredited, Fully Insured

    Background-checked technicians on every call.

Call (614) 267-4111

Frequently asked questions

Not on the list?(614) 267-4111Mon–Sun: 12 AM–11:30 PM
Do I need a permit for outdoor lighting installation in Columbus?
Yes, if you're adding any new line-voltage (120V) outdoor circuit. That includes floodlights, post lamps, architectural lighting, and permanent holiday lighting circuits. Columbus requires an electrical permit, a licensed contractor to perform the work, and a city inspection at completion. Low-voltage transformer systems plugged into an existing outdoor GFCI outlet typically do not require a permit, but the outlet itself must already be GFCI-protected per code.
What's the difference between low-voltage and line-voltage outdoor lighting?
Low-voltage systems run at 12V through a transformer that plugs into an outdoor outlet. They're common for pathway lights and accent lighting and are relatively simple to adjust or expand. Line-voltage systems run at 120V directly from your panel. They're required for floodlights, overhead fixtures, and any high-output security lighting. Line-voltage work requires a licensed electrician and a permit in Columbus. We install both, and we'll tell you honestly which one fits your project.
Do I need an electrician to install outdoor lighting?
For anything connecting to your home's 120V electrical system, yes. Ohio law requires a licensed electrical contractor for line-voltage outdoor circuits, and Columbus requires a permit. Plugging a low-voltage transformer into an existing outdoor outlet is a homeowner task, but wiring a new floodlight, post lamp, or architectural fixture is not. Getting this wrong can void your homeowner's insurance coverage if a claim involves unpermitted electrical work.
How long does outdoor lighting installation typically take?
A single security light or floodlight on an existing outdoor circuit takes two to three hours. A multi-zone landscape lighting system with new circuits, trenching, and a permit inspection runs one to two days depending on property size and how many new circuits your panel needs. We give you a realistic timeline during the initial walkthrough, not after we've already started.
Will switching to LED outdoor fixtures actually save money?
Yes, and the gap is bigger than most people expect outdoors. A standard 150-watt halogen floodlight replaced with a 20-watt LED equivalent uses roughly 87% less electricity for the same light output. For fixtures running on a photocell from dusk to dawn, that's eight to twelve hours of operation every night. The payback period on most LED upgrades is under two years. We match lumen output and color temperature so the change looks deliberate, not like a mismatch.
How deep does outdoor wiring need to be buried in Columbus?
National Electrical Code requires 12 inches for conduit-enclosed conductors and 24 inches for direct-burial cable without conduit in residential applications. Columbus inspectors enforce NEC minimums. Central Ohio's freeze-thaw cycles are a real factor: conduit buried at or just below minimum depth can heave over several winters, which stresses the connections inside. We spec burial depth based on the soil and the route, not just the minimum that passes inspection.
Can outdoor lighting be added to an existing circuit, or does it need its own?
It depends on the load already on the circuit and what you're adding. A single additional fixture on a lightly loaded outdoor circuit is often fine. Multiple floodlights, a post lamp, and a security camera on the same circuit can exceed safe capacity. We calculate the existing load before we connect anything. If you need a dedicated outdoor circuit, we add it cleanly from your panel. Check out our page on lighting in Columbus for more on what a full exterior lighting plan looks like.

Related