Mon–Sun: 12 AM–11:30 PM Serving Columbus since 1994

Faucet Repair and Replacement in Columbus

Kitchen, bathroom, and outdoor faucets fixed right by Columbus plumbers with 32 years in Central Ohio.

Faucet Repair and Replacement in Columbus

Get in touch

Call, text, or schedule online

★★★★★
“Safe electric and plumbing always gets out quickly and it is easy to find appointments. …”
Lauren M. · Google review

Columbus Faucet Replacement: When to Call

Safe Electric & Plumbing handles faucet replacement in Columbus and across Central Ohio, covering kitchen faucets, bathroom fixtures, and outdoor spigots from our base on Morse Rd. The drip, drip, drip of a leaky faucet will drive you nuts and run up your water bill at the same time. Most Columbus homeowners ask us whether they need a replacement or a repair before they even schedule a visit, the honest answer depends on what type of faucet you have, how hard your water is, and how long the problem has been going on. Call (614) 267-4111 and one of our plumbers can walk you through it before we even come out.

Columbus water runs on the harder end of the mineral scale, and that's not a minor detail. Cartridge-style faucets, which are the most common type in Central Ohio homes built after the 1980s, take the worst beating from calcium and lime buildup. Over time the cartridge stiffens, seals crack, and no amount of tightening or replacing washers will stop the drip. Ball-type faucets and ceramic disc models hold up better to hard water but have their own failure points, spring seats corrode, ceramic discs chip. We stock the most common cartridges and replacement parts for the brands Columbus homeowners actually have, so we're not waiting on a part order to finish your job. What drives cost up is usually access: a faucet buried under a pedestal sink in a 1940s Clintonville bathroom takes longer than a standard kitchen swap. Shut-off valve condition matters too. If the valve under your sink hasn't moved in fifteen years, plan on addressing that at the same time. Every job is different, contact Safe Electric & Plumbing for an accurate estimate.

Dripping Faucet? Here Is What Is Actually Happening

A dripping faucet isn't always a worn washer. In Columbus homes with older supply lines, the problem is often the cartridge swollen from mineral deposits, or a seat corroded past the point where a new washer seats properly. We see it constantly in pre-1980 homes in Clintonville, Hilliard, and German Village, where original fittings are still in place and hard water has been doing its work for forty years. If you've already swapped the washers and the faucet still drips, stop there. Our plumbers carry the diagnostic equipment to pressure-test the line and identify whether the issue is the faucet itself or something further upstream, like fluctuating water pressure that's hammering the fixture from inside.
faucets work, professional service in Columbus, OH

Repair or Replace: The Honest Breakdown

Not every dripping faucet needs a full replacement. Not every old faucet deserves another repair.

Repair Makes Sense When

The faucet is less than ten years old, the valve seat is still intact, and the cartridge or washer is the only worn part. A straightforward cartridge swap on a kitchen faucet typically takes under an hour and gets the fixture working like new.

Replace When

The body is corroded, the handles are cracked, or you've had the same leak repaired twice in three years. Throwing repair money at a failing fixture costs more long-term than a clean replacement, especially when Columbus water hardness is shortening the cartridge lifespan anyway.

Call a Plumber When

The shut-off valve under the sink won't close fully, you see corrosion on the supply lines, or the leak is anywhere other than the spout. A slow drip at the base of the faucet or under the cabinet is not a faucet problem. It's a supply line or fitting problem, and ignoring it leads to cabinet rot and mold.

What a Safe Plumbing Faucet Call Looks Like

Diagnose Before We Quote

We inspect the faucet type, valve condition, and supply line before recommending anything. You'll know what's wrong and why before any work starts.

Repair or Replace with Your Input

If a repair is the right call, that's what we do. If replacement is smarter long-term, we'll tell you plainly and let you choose the fixture. We don't upsell a replacement when a $30 cartridge fixes it.

Test, Clean, and Walk You Through It

After installation we pressure-test the line, check every connection, and wipe down the work area. We'll show you where the shut-off valve is and how to operate it. A lot of Columbus homeowners don't know.

Every Faucet Job Backed by the Safe Guarantee

Safe stands behind our work on every faucet repair and replacement. If something goes wrong after we've been there, we come back and fix it.

We've been doing this in Columbus since 1994. Matt Wehrle built this company on the idea that a job isn't finished until it's right, and that hasn't changed in 32 years.
  1. Workmanship guaranteed

    We return and fix any issue with our repair or installation at no charge

  2. BBB accredited

    Independently verified business standards

  3. 4.9 stars, 2,962 Google reviews

    Real Columbus homeowners, verified reviews

Call (614) 267-4111

32 Years of Columbus Plumbing. One Call Handles All of It.

Call (614) 267-4111, nearly 24/7, seven days a week.

Call (614) 267-4111
faucets work, professional service in Columbus, OH

Frequently asked questions

Not on the list?(614) 267-4111Mon–Sun: 12 AM–11:30 PM
Do I need a plumber to replace a bathroom faucet in Columbus?
Not always. An experienced DIYer can swap a straightforward two-handle bathroom faucet if the shut-off valves under the sink close cleanly and the supply lines are in good shape. Where it goes wrong is when the valves are old and won't seat properly, or when Columbus mineral buildup has corroded the connections. If you're dealing with either of those, call us. A valve that cracks during a DIY attempt turns a $100 faucet job into a flooded cabinet.
How long does a faucet replacement take?
A standard kitchen or bathroom faucet replacement runs 45 minutes to 90 minutes for a straightforward swap on accessible plumbing. Add time for corroded supply lines, stuck shut-off valves, or hard-to-reach pedestal sink configurations, both common in older Columbus-area homes. We don't quote a time and then rush it. The job is finished when it's right.
Why does my faucet keep dripping even after I replaced the washer?
In Columbus, the usual culprit is the valve seat. Hard water deposits score the brass seat over time, and a new washer can't form a clean seal against a pitted surface. The seat needs to be re-cut or replaced. If it's a cartridge faucet rather than a compression type, a swollen or cracked cartridge is the more likely cause, replacing just the washer won't do anything on that style of faucet.
My shut-off valve won't fully close. Is that a problem?
It's a real problem and a common one in Columbus homes built before 1990. A valve that doesn't close fully means you can't safely work on the faucet, and it means you can't shut off water quickly in an emergency. We replace shut-off valves routinely alongside faucet work. If yours is a gate-style valve rather than a ball valve, we'd recommend replacing it regardless, gate valves fail frequently and ball valves are far more reliable.
How does Columbus water hardness affect my faucet?
Columbus water contains elevated mineral content, and you'll see it as white scale on aerators and around the base of spout. Internally, those same minerals deposit inside cartridge faucets and compress the seating surfaces. Aerators should be cleaned or replaced every six to twelve months in Columbus. Cartridges in high-use kitchen faucets typically last five to eight years here, shorter than national averages you'll see on manufacturer spec sheets.
What faucet types do your plumbers work on?
All of them: ball-type, cartridge, ceramic disc, and compression faucets across kitchen, bathroom, utility, and outdoor applications. We also handle the supply lines and angle stop valves that connect everything to your home's water supply. If the brand is something uncommon and we need to source a specific cartridge, we'll tell you upfront rather than discovering it mid-job.
What drives the cost of faucet replacement up or down?
The main factors are fixture access, valve condition, and whether the supply lines need replacement at the same time. A pedestal sink in a tight bathroom or a kitchen faucet with a garbage disposal blocking the work area takes longer than a straightforward vanity swap. Corroded shut-off valves add cost because they need to be replaced before any faucet work is safe to complete. Every job is different, contact Safe Electric & Plumbing for an accurate estimate.

Related