Light Fixture Installation in Columbus
From flush mounts to outdoor fixtures, we wire and mount every job to code.

“Adam showed up on time- spent plenty of time explaining our options and quickly sent an estimate. …”
Columbus Light Fixture Installation, Done Safely
Safe Electric & Plumbing handles light fixture installation throughout Columbus and Central Ohio, from straightforward ceiling replacements in Westerville bungalows to multi-fixture rewires in older German Village homes. If you're searching for a qualified electrician to hang a new fixture correctly the first time, call us at (614) 267-4111. 4.9-star reputation built across 2,962 Google reviews.
What drives the cost of a fixture installation? Mostly three things: whether a compatible electrical box already exists, the fixture's weight and wiring complexity, and whether the circuit can handle the load. A basic swap on an existing box in a newer home is straightforward. Moving a fixture, adding a new circuit, or working in a Columbus home built before 1970 with aluminum wiring or knob-and-tube is a different job entirely and should not be attempted without a licensed electrician. We assess the existing wiring before we touch anything, quote the work clearly, and don't start until you've approved the scope. Every job is different, contact Safe Electric & Plumbing for an accurate estimate.
Every Fixture Type, Every Room
One crew handles interior and exterior installations, so you're not coordinating multiple contractors.
Ceiling and Flush-Mount Fixtures
Standard ceiling light replacement is the most common job we do. We verify the electrical box rating, confirm the circuit load, and mount the fixture to current Ohio residential code, including proper grounding, which older Columbus homes frequently lack.
Recessed Lighting
Recessed cans require cutting into the ceiling and running wire back to a switch leg. In finished spaces that's more invasive than it looks. We plan the layout to avoid joists, confirm insulation contact (IC) ratings where needed, and use LED-compatible housings throughout.
Pendant and Chandelier Fixtures
Anything over 35 pounds needs a fan-rated or dedicated fixture box, not a standard pancake box. We see DIY installs pull free from inadequate boxes regularly. We confirm the structural support before the fixture ever leaves the box.
Bathroom and Vanity Fixtures
Bathroom fixture placement is governed by Ohio's adoption of the NEC, fixtures within a specified zone above the tub or shower must be vapor-proof rated. We know the zone dimensions and spec the right fixture, so you don't fail an inspection.
Outdoor Light Fixtures
Exterior fixtures in Columbus need to be rated for wet or damp locations depending on placement. Covered porch fixtures can be damp-rated; a fixture exposed to rain must be wet-rated. We also handle weatherproof junction boxes and GFCI protection required for all outdoor circuits.
Security and Motion Lights
Motion-activated security lighting is one of the highest-ROI exterior upgrades a homeowner can make. We install, wire, and aim the sensors correctly. Most DIY installs have the sensitivity or sweep angle wrong within a month. See our dedicated motion light installation page for more detail.
When to Call an Electrician Instead of Doing It Yourself
How a Fixture Installation Actually Goes
Assessment and Code Review
We check the existing box, circuit load, wire gauge, and grounding before quoting. If we find something that changes the scope, we tell you before we start, not after.
Installation and Wiring
Fixture is mounted to a code-compliant box, conductors connected and secured, ground confirmed continuous. For outdoor work, we verify wet or damp ratings and GFCI protection on the circuit.
Test, Clean, and Walk-Through
We power the circuit, confirm the fixture operates correctly, and walk you through what was done and why. We don't leave until the room looks the way it should.
Ohio Code and Permits for Fixture Work
Quick Facts: Light Fixture Installation in Columbus
Structured for clarity. These are the most common questions answered directly.
Permit Required?
Usually not for a direct fixture swap on an existing circuit. Required when adding a new circuit, moving a fixture location, or finishing a previously unfinished space.
Typical Timeline
A single fixture swap takes 30 to 90 minutes. Multiple fixtures in one visit is efficient. Adding a new circuit or rewiring a room adds time. We'll tell you upfront.
Outdoor Fixture Requirements
Wet-rated fixtures for exposed locations. Damp-rated for covered porches. All outdoor circuits require GFCI protection under current Ohio code.
Weight Limits Matter
Standard electrical boxes are rated for 35 pounds. Chandeliers and heavy pendants require a fan-rated or independently-supported box. We verify before mounting.
Older Home Considerations
Aluminum wiring (common in Columbus homes built 1965 to 1973) requires compatible devices and anti-oxidant compound at every connection. Knob-and-tube wiring cannot support enclosed fixtures safely.
LED Compatibility
Most modern dimmers are designed for LED loads, but not all LED bulbs are dimmable. We confirm compatibility between the fixture, bulb, and dimmer switch before installation.
32 Years Wiring Columbus Homes Right
Matt Wehrle founded Safe Electric & Plumbing in 1994. Since then we've installed fixtures in every Columbus neighborhood, from Short North loft conversions to Powell new builds. Call the number that's been on the side of our vans for three decades.
Call (614) 267-4111
Our Standard on Every Job
What every light fixture installation from Safe Electric & Plumbing includes.
Circuit load verified before installation begins
We don't assume the existing circuit has capacity, we check it.
Code-compliant box and grounding on every fixture
Including homes where the previous wiring skipped the ground conductor.
4.9 stars across 2,962 Google reviews
BBB accredited. In Columbus since 1994.
