Mon–Sun: 12 AM–11:30 PM Serving Columbus since 1994

How to Spot Faulty Wiring Before It Becomes a Hazard

Electrical problems cause more than 50,000 house fires annually. Here is what to watch for.

How to Spot Faulty Wiring Before It Becomes a Hazard

Get in touch

Call, text, or schedule online

★★★★★
“Bryce let me know exactly what was needed and informed me what he would do!”
Frank S. · Google review

Warning Signs Your Wiring Needs Attention

When you think about home maintenance, plumbing and HVAC usually come to mind first. Your home's electrical system deserves equal attention, maybe more. According to the Electrical Safety Foundation International, electrical problems cause more than 50,000 house fires each year, and faulty wiring is one of the leading culprits.

What makes that statistic sobering is that dangerous wiring problems are often invisible. There is no smoke, no visible damage, nothing obvious. Until there is. A fire. A bad shock. Something far worse. The warning signs are there if you know what to look for, and catching them early is the difference between a service call and a catastrophe.

Matt Wehrle

Written by

Matt Wehrle · Owner, Safe Electric & Plumbing & Plumbing

Frequently Blown Fuses or Tripped Circuits

An occasional tripped breaker is normal. Frequent trips are not.

Your circuit breakers are designed to trip when a circuit is overloaded. That is the safety mechanism working correctly. But if the same breaker trips repeatedly, or if fuses blow more than once in a while, the circuit is telling you something. It may be overloaded by too many appliances, or there may be a short somewhere in the wiring. Either way, resetting the breaker and moving on is not a fix. It is a delay. A licensed electrician can trace the cause and correct it before the wiring sustains damage or starts a fire.

Flickering or Dimming Lights

Sometimes it is the bulb. Sometimes it is the circuit.

Since lights draw relatively little power, a flicker here and there usually is not alarming. A loose bulb, a faulty dimmer switch, or a large appliance like a washing machine cycling on can all cause a momentary dip. But if one light flickers consistently, regardless of what else is running, the fixture may be on a circuit that is being pulled too hard, or the wiring connection behind that fixture is loose. A loose connection generates heat. Heat in a wall cavity is exactly where fires start. If the flickering is persistent or involves multiple lights, call an electrician.

Hot Outlets or Switch Plates

Warm to the Touch

An outlet or switch plate that feels warm during normal use signals heat building up behind the wall, likely a loose connection or overloaded wiring.

Discoloration or Scorch Marks

Yellowing or charring around an outlet face means arcing has already occurred. Stop using that outlet immediately and have it inspected.

Burning Smell Near Outlets

A persistent burnt plastic smell near outlets or switches, even without visible damage, means wiring insulation may be degrading. Do not wait on this one.

Using Too Many Extension Cords

Extension cords are a temporary solution, not a permanent one. Using them continuously invites problems: they can kink, fray, overheat, or be pinched under furniture, all of which can damage the cord, trip breakers, or start a fire. If you find yourself routing extension cords across a room because there are not enough outlets where you need them, that is a sign your home's wiring is not keeping up with demand. The right fix is having an electrician add circuits and outlets where you actually need them. It is a straightforward job that eliminates a genuine fire risk.