Mon–Sun: 12 AM–11:30 PM Serving Columbus since 1994

How to Prevent Electrical Fires at Home

Practical steps every Columbus homeowner can take, before a small problem becomes a dangerous one.

How to Prevent Electrical Fires at Home

Get in touch

Call, text, or schedule online

★★★★★
“Cori was our technician and he prompt and efficient with the removal and replacement of our two four foot office ceiling light fixtures. …”
Tim · Google review

What causes electrical fires: and how to stop them

According to the National Fire Protection Association, electrical fires rank among the top four causes of house fires in the United States, alongside cooking, heating equipment, and smoking. The sobering part: most of them are preventable. Overloaded circuits, aging appliances, outdated wiring, and skipped inspections are the usual culprits, and every one of them can be addressed before smoke appears.

The tips below are the same ones our electricians at Safe Electric & Plumbing share with Columbus homeowners every day. They're not complicated. Most cost nothing. A few require a licensed electrician, and when they do, we'll tell you plainly.

Matt Wehrle

Written by

Matt Wehrle · Owner, Safe Electric & Plumbing & Plumbing

Don't Overload Electrical Outlets

Electrical circuits are designed to handle a specific load. Plugging multiple power strips or extension cords into a single outlet pushes past that limit. The circuit heats up, and heat is how fires start. If you're stacking power strips to cover a shortage of outlets, that's a signal to call an electrician, not add another strip. Adding wall outlets is a straightforward job, and it costs far less than fire damage.

Keep Appliances Off Extension Cords

Appliances should plug directly into wall outlets, never into extension cords or power strips. Running a refrigerator, dryer, or microwave through a power strip overworks the cord and forces the appliance's motor to run hotter than it was built to. Overheated motors, compressors, and heating elements are a common ignition source. If an outlet isn't where you need it, an electrician can put one there. It's also worth retiring aging appliances: an old unit drawing more current than it should is both a fire risk and an energy drain. Replacing it is almost always cheaper than repairing a wiring problem it caused.

Install Arc Fault Circuit Interrupters

Standard breakers trip on overloads. AFCI breakers also catch the arcing that starts most electrical fires.

An arc fault circuit interrupter, AFCI, detects the irregular electrical arcing that happens when wiring is damaged, connections are loose, or a cord is pinched under furniture. Standard breakers don't catch this. AFCI breakers do, and they cut power before the arc ignites surrounding material. Ohio building code now requires AFCI protection in most living spaces of new construction. Older Columbus homes, especially anything built before 2000, rarely have them. Upgrading your electrical panel to include AFCI breakers is one of the highest-value safety improvements you can make. Read more about how these breakers work in our guide to arc fault breakers and electrical fires.
panel and breaker condition work, illustration in Columbus, OH

Schedule Regular Electrical Inspections

An inspection catches problems your circuit breakers won't, because some faults don't trip breakers, they just build heat.

Panel and breaker condition

We check for overloaded circuits, double-tapped breakers, and signs of heat damage inside the panel.

Outlets and GFCI protection

Every outlet near water, kitchens, baths, garages, outdoors, is tested for proper GFCI protection. Learn more in our guide to the role of GFCI outlets.

New load compatibility

EV chargers, smart-home systems, and high-draw appliances all add load. We verify your system can handle what you've added, or tell you what an electrical service upgrade would take.

Safe Electric & Plumbing Does Electrical Inspections in Columbus

If you'd like to schedule an electrical inspection, call Safe Electric & Plumbing at (614) 267-4111. One of our electricians will visit your Columbus-area home, walk through your panel, outlets, switches, and any other areas of concern, and give you a straight answer about what they find. We've been doing this work in Central Ohio since 1994. If something needs attention, we'll tell you. If it doesn't, we'll tell you that too.

Call (614) 267-4111
outlets and gfci protection work, illustration in Columbus, OH

More From the Safe Electric & Plumbing Blog

Water Heater Services: A Complete Guide 2026

Everything Columbus homeowners need to know about water heater repair, replacement, and what to expect from a service call.

What to Expect from an Electrical Inspection

A step-by-step look at what our electricians check during a home electrical inspection, and what the results mean for your home.

Water Filtration Installation: A Comprehensive Guide

Whole-home and point-of-use filtration options explained, from what they filter to what installation involves.

Why You Need a Plumber for Low Water Pressure

Low pressure is rarely a simple fix. Here's what causes it and why it's worth a professional diagnosis.

How to Clean Shower Drains and When to Call a Plumber

The difference between a clog you can clear yourself and one that signals a deeper drain issue.