Mon–Sun: 12 AM–11:30 PM Serving Columbus since 1994

Get in touch

Call, text, or schedule online

★★★★★
“Jack was fantastic. He showed up on time, explained exactly what was going on with our panel, and walked us through the options before touching anything. …”
Doug N. · Google review

Bexley Electrical Work Done by People Who Know These Homes

If you need an Electrical Contractor in Bexley, Safe Electric & Plumbing has been doing this work since 1994, long before most of the companies you'll find in a quick search even existed. Bexley's housing stock is older than most Columbus suburbs, and that matters. A lot of these homes were built in the 1940s or earlier, which means knob-and-tube wiring, undersized service entrances, and panel boxes that were never designed to handle a modern kitchen, let alone EV chargers or home offices. 4.9 stars across 2,962 Google reviews, but the reason those reviews exist is that we actually know what we're looking at when we open a Bexley breaker box.

Bexley sits just east of Columbus proper, and the City of Bexley Building Department issues its own electrical permits separately from Columbus. Electrical contractors must register annually with the city, and no wiring can be concealed before the city's Electrical Inspector signs off. We know that process. American Electric Power serves Bexley residents for utility power, and we coordinate with their requirements on service upgrades and meter reconnections. If you're in the Bexley Park neighborhood, be aware there's a moderate flood risk over the next 30 years, and water intrusion near electrical panels or subpanels is exactly the kind of thing we check for during any inspection. Call (614) 267-4111 to get someone out to your home.

What We Handle in Bexley

From a single tripping breaker to a full-house rewire, here's where we spend most of our time in Bexley.

Older Homes Need Contractors Who've Seen This Before

Most Bexley homes were built well before modern electrical codes existed. Knob-and-tube wiring was standard into the 1930s. Fuse boxes replaced by early breaker panels in the 1950s and 60s weren't sized for today's loads. And many homes saw piecemeal additions over the decades, a circuit added here, a subpanel tucked in there, that were never fully inspected or brought to current code. The honest answer to 'do I need full rewiring or just a panel upgrade?' depends on what's actually in the walls. We've written about how to tell if your wiring needs replacement because a lot of homeowners get sold on a panel upgrade when the wiring behind the panel is the real problem, and vice versa. We won't recommend a full rewire when targeted repairs are the right call. But we won't paper over a safety issue either. Bexley's Building Department requires that no wiring be concealed before the city's Electrical Inspector approves it. That's not a hassle. It's protection for you as a homeowner. We pull permits, schedule inspections, and make sure every job closes clean. If a contractor offers to skip the permit to save you money, that's your signal to call someone else.

Bexley's Electrical Contractor Since 1994

32 years in Columbus. 2,962 Google reviews at 4.9 stars. BBB accredited. One call gets you a technician who knows what a 1940s Bexley home looks like inside the walls.

Call (614) 267-4111
electrical panel replacement work, illustration in Bexley, OH

Every Service We Offer in Bexley

Electrical and plumbing, handled by one team. Call us for any of these in Bexley.

Questions Bexley Homeowners Ask Us

Not on the list?(614) 267-4111Mon–Sun: 12 AM–11:30 PM
Can I upgrade my electrical panel without rewiring the rest of the house?
Usually, yes. If the branch wiring in the walls is in good condition. A panel upgrade addresses the service entrance and distribution equipment; rewiring addresses the circuits that run through the house. In many Bexley homes from the 1940s and 1950s, the branch wiring is the bigger concern. We inspect both before recommending either. Sometimes a panel upgrade is the right first step; sometimes the wiring situation makes it the wrong place to spend money. We'll tell you which is which.
What should I do if my circuit breaker keeps tripping?
A breaker that trips repeatedly is telling you something. It's either overloaded, too many devices on one circuit, or it's detecting a fault in the wiring. Don't just reset it and ignore it. An overloaded circuit is a fire risk, and a faulty breaker that stops tripping is worse than one that trips correctly. Call us, describe what's on that circuit and when it trips, and we'll tell you whether it needs a service call or whether it's something you can address yourself.
Do I need a permit for electrical work in Bexley?
For most electrical work beyond replacing a like-for-like fixture or device, yes. The City of Bexley Building Department issues electrical permits separately from Columbus, and contractors must be registered with the city annually. Wiring cannot be covered or concealed until the city's Electrical Inspector approves it. We handle the permit process as part of the job. You don't have to track it down yourself. Skipping permits on a home you plan to sell creates problems at closing and with insurance.
What are the signs that my Bexley home's wiring is unsafe?
The most common signs in older Bexley homes: breakers that trip frequently, outlets or switches that feel warm to the touch, lights that flicker or dim when an appliance runs, a faint burning smell near outlets or panels, and two-prong ungrounded outlets throughout the house. If the home still has a fuse box rather than a breaker panel, that's worth a conversation too. Our fuse box vs. circuit breaker guide covers the practical differences. Any of these symptoms alone is worth a professional look.
How soon can you get to a Bexley home?
We're based at 3208 Morse Rd in northeast Columbus, which puts us close to Bexley. For non-emergency calls we typically schedule within a day or two. We're available nearly 24/7, seven days a week, so if something can't wait, call (614) 267-4111 and we'll tell you honestly how fast we can get there.
Do I need to upgrade my electrical panel for a kitchen remodel in Bexley?
It depends on what you're adding. A kitchen remodel that adds a dishwasher, microwave circuit, and additional dedicated outlets may push a 100-amp panel close to its limit, especially if the rest of the house is already loaded. We look at your current panel capacity and the planned load before telling you whether an upgrade is necessary. Sometimes it is. Sometimes you can add circuits without touching the panel. Every job is different, contact Safe Electric & Plumbing for an accurate assessment.
What should I do if my circuit breaker keeps tripping in my Bexley home?
A breaker that trips repeatedly is either overloaded or detecting a fault in the wiring. Don't just reset it and ignore it. An overloaded circuit is a fire risk, and a breaker that stops tripping when it should trip is worse than one that works correctly. Call us, describe what's on that circuit and when it trips, and we'll tell you whether it needs a service call or whether it's something you can address yourself.
What are the signs that my older Bexley home's wiring is unsafe?
The most common signs in Bexley's older housing stock: breakers that trip frequently, outlets or switches that feel warm to the touch, lights that flicker or dim when an appliance starts, a faint burning smell near outlets or the panel, and two-prong ungrounded outlets throughout the home. A fuse box instead of a breaker panel is worth a professional conversation too. Any of these symptoms alone is reason enough to have someone take a look before it becomes an emergency.
How quickly can Safe Electric & Plumbing get to a Bexley home?
We're based at 3208 Morse Rd in northeast Columbus, which puts us a short drive from Bexley. For non-emergency work we typically schedule within a day or two. We're available nearly 24/7, seven days a week, so if something can't wait, call (614) 267-4111 and we'll tell you honestly how fast we can be there.
Does a kitchen remodel in Bexley require an electrical panel upgrade?
It depends on what you're adding and what your current panel can handle. A remodel that adds dedicated circuits for a dishwasher, microwave, and additional outlets may push a 100-amp panel close to its limit, particularly in a home where the rest of the service is already loaded. We look at your actual panel capacity and planned load before making a recommendation. Sometimes a panel upgrade is necessary; sometimes you can add circuits without touching it. Every job is different, contact Safe Electric & Plumbing for an accurate assessment.

We Serve Bexley and the Surrounding Area

Our crew runs calls across Central Ohio every day. Bexley is a short drive from our Morse Rd location, and we know the neighborhoods.

Our shop

3208 Morse Rd, Columbus, OH 43231

Mon–Sun: 12 AM–11:30 PM

Our shopTowns we serve45-mile service area

Related